 | 1. High Density Woods with superior mechanical properties are used in the manufacture of Sarkar BWP Plywood.
2. Will comfortably meet IS:303-1989 water resistance requirements after immersion in boiling water for 72 hours.
3. Superior bond strength between veneers, virtually unaffected by moisture and Dampness.
4. Excellent machineability.
5. Can effectively replace solid wood of higher thickness.
Sarkar Ply can withstand severe climatic conditions. It passes through various quality measures starting from selection of hardwood timbers, strict controll of thickness of face veneer to not less than 1.2mm. and bonded with special quality of BWP grade PF resin. Finally it is treated in a vacuum pressure impregnation plant, using specified borers, insects, fungi and termites.
Raw Material
100 percent Eucalyptus Grandis hardwood core.
Face veneer 100 percent Gurgang.
Sizes
2.44 x 1.22 mts.
2.44 x 0.92 mts.
2.14 x 1.22 mts.
2.14 x 0.92 mts.
1.84 x 1.22 mts. ������
1.54 x 0.92 mts. ����
Thickness
4mm, 6mm, 9mm, 12mm, 16mm, 19mm, 21mm
Features : Fine use in Marine work, ship building and other exterior works.
High Density Wood used which does not react to Termites, Fungus, Heat, Water or Snow
|
